SividnicaImported hydraulic lifting platformWhat are the steps for correct operation

The lifting platform of automation technology is relatively simple and convenient in actual operation. High safety factor and strong reliability. It is an ideal choice where working at heights in various workplaces is a must. The material of the lifting platform itself is a high-quality steel structure. Laser welding technology electronics. Practical operation of double-sided welding forming process. There are safety devices for advance warning such as level alarm， static balance valve and fully automatic safety board installed on the platform. Therefore， the safety factor of the platform in use and operation is absolutely reliable. It is suitable for high-altitude operations in production workshops of processing plants and auditoriums in city squares， airports or science and technology parks. Specializing in elevator manufacturers， old brand， price advantage，升降机厂家 quality guaranteed!

9The working principle of the lifting platform is that the hydraulic oil is formed by the vane pump to form a certain pressure，ProvHydraulic small lifting platformTechnology in ProtectionWhat are the reasons for wear and tear and enters the lower end of the hydraulic cylinder through the oil filter， the isolation electromagnetic reversing valve， the throttle valve， the hydraulic control check valve， so that the hydraulic cylinder The piston moves upward to lift the heavy object， and the oil returned from the upper end of the hydraulic cylinder returns to the oil tank through the isolating electromagnetic reversing valve. The rated pressure is adjusted by the overflow valve， and the reading value of the pressure gauge is observed by the pressure gauge.

eSividnicaThe function of the power element (oil pump) is to convert the mechanical energy of the prime mover into hydraulic pressure and it is the power component in the hydraulic transmission.

The hydraulic lifting platform is an indispensable and important operating equipment in society， and this is the case， hydraulic freight elevator wholesale manufacturers will often forget to maintain the hydraulic lifting platform，升降机厂家 just like this it will cause damage to the equipment， reduce work efficiency， and pose a threat to life safety Threat， therefore， in order to prolong the service life of the hydraulic lifting platform， it is necessary to use and maintain the equipment reasonably. The following points are the maintenance of the hydraulic lifting platform.

AKesul ESAFWith the increase of market demand， mobile lifting platform， as a kind of high-altitude operation machinery and equipment， is more and more widely used in peoples life and work. So， how to operate the mobile lifting platform safely?

ObThe hydraulic freight elevator manufacturer tells you the reason and the elimination method: Reason: Overload Elimination method: Just reduce the load Reason: The oil return valve is not closed Elimination method: Tighten the oil return valve to eliminate Cause: The one-way valve of the manual pump is stuck，升降机厂家 Return failure cleaning method: unscrew the valve port bolt of the oil pump， overhaul，ProvHydraulic small lifting platformTechnology in ProtectionWhat are the reasons for wear and tear clean， replace and clean the hydraulic oil to clean.

Some hydraulic elevators have oil leakage pollution problems， and the low temperature in the north affects the work of oil pumps. The above are the advantages and disadvantages of hydraulic freight elevators. Although hydraulic elevators have limited operating height and speed， they are safeHigh performance， low cost， very practical in some special occasions.

There is electrostatic induction in the lifting platform， which causes no rise or fall. It is because there is no wire connector in the wiring process， which makes the hydraulic lifting platform have static induction and causes the power box to fail. You can touch the ground with a metal product.

eThere are too many impurities in the hydraulic oil.

CFocus on the development，升降机价格_液压梯_家用升降梯_家用升降梯-升降机厂家 sales and service of hydraulic lifting platforms and elevators. The main products are scissor platform， aluminum alloy lift， self-propelled lift， mobile steel-mounted aerial work lift， fixed hydraulic boarding bridge， mobile hydraulic loading and unloading boarding bridge and other nine conventional series More than specifications of aerial work lifts. In addition， more than a dozen new products have been developed and manufactured according to the requirements of different customers， such as special lifts for villas， leaping lifts for theaters， railway guide rail maintenance lifts and fully automatic picking vehicles， especially the aluminum alloy descending lifts that breakThe concept of being able to go up has completely changed the problem that the warehouse on the first floor and the second floor of the street cannot deliver goods. With high-quality products and excellent service， we have won strong support and unanimous praise from our customers.

KretailerOptional configuration of fixed lifting platform: fixed lifting platform can be equipped with auxiliary devices according to the requirements of use， and any combination can be made， such as safety protection device of fixed lifting platform; electrical mode; working platform form; power form， etc. The correct selection of various configurations can maximize the function of the lifting platform and achieve the best use effect.

rSThe load and load of the hydraulic elevator act directly on the foundation pit through the oil cylinder. The strength of the shaft is low， and the shaft of brick structure or brick-concrete structure is sufficient.

AC contactors can also generate high noise. When the power supply voltage is lower than % of the rated voltage， the short-circuit ring of the contactor core is broken， the contact surface between the yoke and the armature is skewed dust or rust is in poor contact， and the contactor will produce humming noise.

There are many reasons for the unstable descent of the workbench， such as overloaded load， unstable support， severe partial load， hydraulic oil impurities， etc. For the above reasons， it can be solved by reducing the load， adjusting the center of gravity of the load， and replacing the hydraulic oil.

Installation materialsmElectrical equipment or component failure The hydraulic freight elevator manufacturer tells you that the main reasons for the high noise of the electric motor are: the motor rotor is bent， severely worn or the bearing is damaged， which causes the electric motor to sweep and generate noise; Noise; if the electric motor is not fixed firmly， it can also cause vibration and generate high noise.

RThe hydraulic system of the fixed lifting platform of the hydraulic freight elevator is equipped with anti-falling and overloading safety protection devices， and operation buttons can be set on each floor and the working surface of the lifting platform to achieve multiple points.

Frequently check whether each organization can work normally and whether there is noise. If any problem is found， it should be cleaned up in time.

xSividnicaHow much do you know about the classification of simple freight elevator lifting platforms? Hydraulic freight elevator manufacturers will tell you.

gLThe hydraulic oil is formed by the vane pump to a certain pressure， and enters the lower end of the hydraulic cylinder through the oil filter， the throttle valve， the hydraulic control check valve， and the balance valve， so that the piston of the hydraulic cylinder moves upward and lifts the heavy object. ， the oil returned from the upper end of the hydraulic cylinder returns to the oil tank through the isolating electromagnetic reversing valve， and its rated pressure is adjusted through the overflow valve， and the pressure gauge is observed through the pressure gaugeThe piston moves downward (that is， the weight falls). The hydraulic oil enters the upper end of the hydraulic cylinder through the anti-type electromagnetic reversing valve， hydraulic control check valve， throttle valve， and isolating electromagnetic reversing valve. In order to make the weight drop smoothly and the brake safe and reliable， a balance valve is set on the oil return circuit to balance the circuit and maintain the pressure so that the descending speed is not changed by the weight， and the throttle valve adjusts the flow rate and the lifting speed. In order to make the brake safe and reliable and prevent accidents， a hydraulic check valve， that is， a hydraulic lock， is added to ensure safe self-locking when the hydraulic pipeline is broken. Install an overload sound-activated alarm to distinguish overload or equipment failure.

Choosing a hydraulic freight elevator with a favorable price based on cost performance is one of the considerations for buyers. From the perspective of purchase cost， but the overall civil construction cost is lower than ordinary elevators. Freight elevator manufacturers are not responsible for civil engineering work， consumers need to choose reliable civil engineering units for construction， which ensures safety， reliability and economy. Therefore， users can purchase cost-effective products according to the freight elevator price and civil engineering budget.